Changing Wheels; Check Engine Oil Level; Change The Engine Oil - Kärcher KM 100/100 R LPG Betriebsanleitung

Operating Instructions

Changing wheels

Danger!
Preparations
! Stand sweeper on a flat surface
! Remove the ignition key
! Wear warning clothing when
performing repair work on public
streets where it is dangerous
because of moving traffic
! Check that the ground is stable
! Protect the machine additionally
from moving with a wheel chock
Recommended express
assistance:
! Check the tyre tread for
imbedded objects
! Remove the objects
! Use a suitable, commercially
available tyre repair agent
Note:
Comply with the recommendations
of the respective manufacturers
Continuing the journey is possible if
the recommendations of the product
manufacturer are observed
Change the tyre or the wheel as
soon as possible
! Unscrew the wheel nuts
! Place the jack in position
KM 100/100 R B / KM 100/100 R LPG
Fixing point for jack (front wheel)
Jack fixing point (rear wheels)
! Lift the machine with the jack
! Remove the wheel nuts
! Slide the wheel off
! Position the spare wheel
! Screw on wheel nuts
! Lower the machine with the jack
! Tighten the wheel nuts
Note:
Use suitable, commercially available
jacks
Check engine oil level and
top-up
Note!
The engine is provided with an oil
shortage switch. When the level is
too low the engine switches itself off
and cannot be restarted until the
engine oil has been topped up.
Danger!
Danger of burns!
! Let the engine cool-down
! Wait at least 5 minutes after
stopping engine before
performing the check
! Open unit cover, engage stay bar
! Turn out oil dip stock
! Wipe and insert oil dip stick
! Pull out oil dip stick
— At least a third of the oil dip stick
must be immersed into the oil.
— Refill engine oil up to lower edge
of tank inlet if the oil level is
below it.
! Fill engine oil using the oil
change pump 6.491-538
! Close the oil fill opening
! Wait for at least 5 minutes
! Check the engine oil level
For oil grade see: Technical data
English

Change the engine oil

! Turn out oil dip stock
! Suck out engine oil with oil-
change pump 6.491-538 through
the oil filler
! Fill in new engine oil with a clean
6.491-538 oil change pump using
the oil filler
For oil grade see: Technical data
! Close the oil fill opening
! Wait for at least 5 minutes
! Check the engine oil level
36