PeakTech 1360 Bedienungsanleitung Seite 194

(4) Turn the M knob to select the desired waveform (or touch if the LCD is touchscreen).
E.g. select Noise. Select Select to output the noise waveform.
Note: For single-channel, you can push
Built-in Waveform Table
Name
Common
StairD
StairU
StairUD
Trapezia
RoundHalf
AbsSine
AbsSineHalf
SineTra
SineVer
NegRamp
AttALT
AmpALT
CPulse
PPulse
NPulse
Maths
ExpRise
ExpFall
Sinc
Tan
Cot
Sqrt
XX
HaverSine
Lorentz
5.Use the Arbitrary Function Generator (Optional)
Explanation
Stair-down waveform
Stair-up waveform
Stair-up and stair-down waveform
Trapezoid waveform
RoundHalf wave
Absolute value of a Sine
Absolute value of half a Sine
Sine transverse cut
Sine vertical cut
Negative ramp
Gain oscillation curve
Attenuation oscillation curve
Coded pulse
Positive pulse
Negative pulse
Exponential rise function
Exponential fall function
Sinc function
Tangent
Cotangent
Square root
Square function
HaverSine function
Lorentz function
on the front panel to output DC.
80