PeakTech 1360 Bedienungsanleitung Seite 167

3. Select Type in the bottom menu, in the left menu, turn the M knob to select
Image.
4. Select Save in the bottom menu, a input keyboard used to edit the file name will
pop up. The default name is current system date. The length of file name limits16
characters. Select the
USB disk Requirements
The supported format of the USB disk: FAT32 file system, the allocation unit size
cannot exceed 4K, mass storage USB disk is also supported. If the USB disk doesn't
work properly, format it into the supported format and try again. Follow any of the
following two methods to format the USB disk: using system-provided function and
using the formatting tools. (The USB disk of 8 G or 8 G above can only be formatted
using the second method – using the formatting tools.)
Use system-provided function to format the USB disk
1. Connect the USB disk to the computer.
2. Right click Computer- Manage to enter Computer Management interface.
3. Click Disk Management menu, and information about the USB disk will display
on the right side with red mark 1 and 2.
Figure 4-2: Disk Management of computer
4. Right click 1 or 2 red mark area, choose Format. And system will pop up a
warning message, click Yes.
4.Advanced User Guidebook
key of the keyboard to confirm.
53