PeakTech 1360 Bedienungsanleitung Seite 173

Record menu (External Storage) shows as follows:
Menu Setting
Mode
Record
End frame
Record mode
FrameSet Interval
Infinity
Refresh
Operate
Note:
Both of the waveforms of Channel 1 and Channel 2 will be recorded. If a Channel is
turned off while recording, the waveform of the channel is invalid in the playback
mode.
To use wave record to external, do as follows:
1. Push Save button.
2. Select Type in the bottom menu, in the left menu, turn the M knob to select
Record.
3. Select Mode in the bottom menu, select OFF in the right menu.
4. In the bottom menu, select Storage as External.
5. Select Mode in the bottom menu, select Record in the right menu.
6. Select FrameSet in the bottom menu, set End frame and Interval in the right
menu. If you want to record wave to external infinitely, select Infinity in the right
menu, the End frame will display "-".
7. In the bottom menu, set Refresh.
8. In the bottom menu, select Operate as Play.
Connect external device to the computer, and wave_record_0.bin is the recorded
file. Open the software, and do as follows to play back the waveform.
1. Choose Communications Auto Player.
2. Transform recording waveform from machine.
3. Add the well transformed files.
4. Set play mode and time delay.
5. Click the green button on the left corner to begin playing back the waveform.
4.Advanced User Guidebook
OFF Close wave record function
Set record menu
Turn the M knob to select the number of frames to
record (1 - 1000)
Turn the M knob to select the interval between
recorded frames (1ms - 1000s)
Record infinitely until the storage medium is full
ON Refresh wave during recording
OFF Stop refreshing
Play Begin to record
Stop Stop recording
Instruction
59