PeakTech 1360 Bedienungsanleitung Seite 161

RS232 Trigger menu list:
MENU SETTING
Bus Type RS232
Sour
ce
Pola
Input
rity
Start
Error
When
Chk Error
Data
Start
Error
Configure
Chk Error
4.Advanced User Guidebook
RS232 Trigger
INSTRUCTION
Set vertical channel bus type as RS232 trigger.
CH1 Select CH1 as the trigger source.
Select CH2 as the trigger source.
CH2
Nor Select polarity of data transmission as Normal. Select
mal polarity of data transmission as Inverted.
Inve
rted
Trigger on the start frame of position. After choosing
this condition, press Configure to enter detailed
settings.
Trigger when error frame is detected. After choosing
this condition, press Configure to enter detailed
settings.
Trigger when Chk Error is detected. After choosing
this condition, press Configure to enter detailed
settings.
Trigger on the last bit of the preset data. After
choosing this condition, press Configure to enter
detailed settings.
Common Baud: adjust M knob to choose common
baud.
Custom Baud: adjust M knob to choose baud, ranges
from 0 to 10000000.
Stop Bit：Select "1"or "2".
Parity: "NO""EVEN""ODD"
Common Baud: adjust M knob to choose common
baud.
Custom Baud: adjust M knob to choose baud, ranges
from 0 to 10000000.
Even-Odd：Select Even or Odd.
Common Baud: adjust M knob to choose common
baud.
Custom Baud: adjust M knob to choose baud, ranges
from 0 to 10000000.
47