PeakTech 1360 Bedienungsanleitung Seite 150

source is CH1, and Sync type is Even.
Video Trigger menu list:
MENU SETTING
Single Mode
Source
Modu
SECAM
Sync
Line NO.
Mode
Holdoff
3. Slope Trigger
Slope trigger sets the oscilloscope as the positive/negative slope trigger within the
specified time.
In Slope Trigger mode, the trigger setting information is displayed on bottom right of
the screen, for example,
trigger source is CH1, slope is rising, 0.00mV is the differential between up level and
low level threshold.
Slope trigger menu list:
MENU SETTING
Single
Slope
Mode
CH1
Source
CH2
slope
When
4.Advanced User Guidebook
INSTRUCTION
Video Set vertical channel trigger type as video trigger
CH1 Select CH1 as the trigger source
CH2 Select CH2 as the trigger source
EXT The external trigger input
EXT/5 1/5 of the external trigger source for increasing range
of level
NTSC
PAL Select video modulation
Line Synchronic trigger in video line
Field Synchronic trigger in video field
Odd Synchronic trigger in video odd filed
Even Synchronic trigger in video even field
Synchronic trigger in designed video line, turn the M
knob or click
Auto Acquire waveform even no trigger occurred
INSTRUCTION
Set vertical channel trigger type as slope trigger.
Select CH1 as the trigger source.
Select CH2 as the trigger source.
Slope selecting
to set the line number
，indicates that trigger type is slope,
36