PeakTech 1360 Bedienungsanleitung Seite 181

Rise Time: Time that the leading edge of the first pulse in the waveform takes to
rise from 10% to 90% of its amplitude.
Fall Time: Time that the falling edge of the first pulse in the waveform takes to
fall from 90% to 10% of its amplitude.
+D width: The width of the first positive pulse in 50% amplitude points.
-D width: The width of the first negative pulse in the 50% amplitude points.
+Duty: +Duty Cycle, defined as +Width/Period.
-Duty:-Duty Cycle, defined as -Width/Period.
Delay A→B : The delay between the two channels at the rising edge.
Delay A→B : The delay between the two channels at the falling edge.
Duty cycle: Defines as (the width of the positive pulse)/(Entire period)
Phase: Compare the rising edge of CH1 and CH2, calculate phase difference of
two channels.
Phase difference =[ (Delay between channels at the rising edge)*PI]/Period.
Other measurements
+PulseCount
reference crossing in the waveform.
-PulseCount
reference crossing in the waveform.
RiseEdgeCnt
value to the high reference value in the waveform.
FallEdgeCnt
4.Advanced User Guidebook
Figure 4-15
: The number of positive pulses that rise above the mid
: The number of negative pulses that fall below the mid
: The number of positive transitions from the low reference
: The number of negative transitions from the high
67