Care And Cleaning - Gastroback 40969 DESIGN ADVANCED Bedienungsanleitung

Clean the appliance after use in accordance to the instructions
in chapter Care and Cleaning. Do not leave any food dry on the
surfaces of the appliance.

CARE AND CLEANING

To avoid injuries to persons and damage, always
WARNING:
switch ´Off` the appliance, wait for the motor to stop completely
and unplug the appliance immediately after operation and before
disassembling or cleaning the appliance. With the appliance con-
nected to the power supply, do not touch the assembled tools with
your hands or any objects.
DO NOT place the appliance, accessories or power cord in
an automatic dishwasher. Do not immerse the motor housing or
power cord in any liquids or spill any liquids on it. Always wipe
off spilled liquids immediately.
Do not use abrasive cleaners, cleaning pads, cor-
CAUTION:
rosive chemicals (disinfectants, bleach) or any sharp or hard
objects (i.e. metal scouring pads) for cleaning, for this could
damage the surfaces. Carefully clean the appliance with a dam-
ped sponge or cloth and warm soapy water.
. Switch ›Off‹ (speed control into ›Off‹-position), wait for the
1
motor to stop completely and unplug the appliance from the
power outlet.
. Disassemble the processing tool regarding the instructions
2
›Disassembling the processing tools.
3 . Clean the processing tool with a soft nylon washing brush
and warm dish-water. Rinse the processing tool thoroughly
under running water.
ATTENTION:
Soak stubborn residues on the processing tool in warm dish-water for approximately
10 minutes and then remove the residues with a soft sponge.
Do not place the motor housing, accessories or power cord in an
WARNING:
automatic dishwasher. Do not use any hard or sharp utensils for cleaning. Do not
immerse the appliance or power cord in water or any other liquid. Do not pour or
drip any liquids on the appliance or power cord. Do not place the appliance on wet
or damp surfaces. When liquids are spilled on the appliance, immediately unplug
the appliance and dry it to avoid risk of electric shock or fire. Always handle with
care and without violence.
Do not clean the processing tool in an automatic dishwasher.
46
K
locked
L
M
N