Safeguards For Daily Operation - Gastroback 40969 DESIGN ADVANCED Bedienungsanleitung

• DO NOT immerse the motor housing or power cord in any liquids or spill any
liquids on it.

SAFEGUARDS FOR DAILY OPERATION

• The appliance is designed for normal household quantities. Do not operate or
store the appliance outdoors or in damp or wet areas. Do not operate the appli-
ance in continuous operation for more than 10 minutes to avoid overheating.
If processing large quantities of food, interrupt operation after 10 minutes and
unplug the appliance for a few minutes, to let the motor cool down.
• Do not attempt to operate the appliance using any parts or accessories not recom-
mended by the manufacturer (i.e. processing tools). Especially the whisk, beater
and dough hook are sensitive to careless handling. Do not operate the appliance,
when the appliance or any part of it is likely to be damaged, to avoid risk of over-
heating, fire, electric shock or any other damage or injuries to persons. Do not
attempt to open the motor housing or to repair the power cord. Check the entire
appliance regularly for proper operation. The appliance is likely to be damaged
if the appliance was subject to inadmissible strain (i.e. overheating, mechanical
or electric shock) or if there are any cracks, excessively frayed parts, distortions or
the gear stalls or stucks. The processing tools can get damaged or bend in case
of inadmissible strain. In this case, immediately unplug the appliance and return
the entire appliance (including all parts and accessories) to an authorised service
centre for examination and repair. During operation do not block the ventilation
slits at the back of the appliance.
• Always immediately unplug the appliance after each operation and before assem-
bling or disassembling the processing tool. Always ensure, that the processing
tool is engaged firmly before connecting the appliance to the mains power supply
(see ›Operation‹). Never use force when assembling or disassembling the proces-
sing tools. To disassemble the processing tool push it upwards and turn it clock-
wise (regard the instructions ›Assembling the processing tool‹) Always handle the
entire appliance and the processing tools with care and without violence.
• Do not lift, pull or carry the appliance by the processing tool or power cord. To
move the appliance, always hold on to the mixer stand.
• Before use, always make sure that the appliance is properly and completely
assembled (see ›Operation‹).
• Close supervision is necessary when the appliance is used near young children.
Do not let young children play with any parts of the appliance or the packing. The
appliance is not intended for use by children or infirm persons without supervisi-
on. Take care that no one will pull the appliance by the power cord, especially
when young children are near. Place the appliance on a clean, dry and stable
surface where it is protected from inadmissible strain (i.e. mechanical or electric
shock, overheating, frost, moisture, direct sunlight) and where young children
38