Conrad GKA100 Bedienungsanleitung Seite 93

Phone areas (only affects function INCALL):
There is the option of defining phone number ranges that are permitted for the INCALL
function. Use the normal „SET TEL" command with the placeholders; see the following
example.
The following numbers are to be released for INCALL:
+491555512345
+491555523456
+491555534567
Programme the following phone number:
+4915555*****
The asterisk ( * ) is a placeholder for any digit.

The corresponding number of placeholders ( * ) must be inserted. The calling phone
number is compared to these place holders. If the calling number is longer or shorter
than placeholders available, the number will be rejected.
Please observe that all other phone number combinations are permitted! You
accept this risk when using this function.
Deleting the phone numbers saved
To delete a phone number, you need the following commands:
Example: Deleting the 1st and 3rd number
RESET TEL1 #1513
RESET TEL3 #1513
To delete all phone numbers:
RESET TELALL #1513
After sending the command „RESET TEL....", you will receive a text message answer.
93