Changing The Pin Code (Pin); Changing The Calling Sound And Volume Settings (Audio) - Conrad GKA100 Bedienungsanleitung

12.1.4 Changing the PIN Code (PIN)

To secure the product from unauthorised access, the standard PIN „1513" may be set to any
other value.
Change the PIN code as follows:
SET PIN <new PIN> #<old PIN>
Example: Changing old PIN 1513 to new PIN 1234:
SET PIN 1234 #1513
For every new text message command, the new PIN code now has to be appended preceded
by a (#) sign (space before the #). If the wrong PIN code is entered or the PIN code is not sent,
you will not receive an answering text message.

Changing of the PIN code will change both the settings of the car alarm system and
the PIN code of the SIM card! The PIN code always has 4 figures.
When the PIN code is lost (lost or forgotten), the product can be reset to factory settings /see
chapter „Factory Settings").
Your programming will be lost when resetting!
Then you have to programme the device again as described in the chapter „Programming
(Setting) of the Device".
Resetting the device to factory settings will not affect the SIM card. The SIM card PIN is
retained.

12.1.5 Changing the Calling Sound and Volume Settings (AUDIO)

The car alarm system has different audio components like speakers, microphone and remote
control. The audio settings are set in the default settings on level 5.
The set value can be selected from 0 to 9; „0" is the lowest and „9" the highest level. Use the
following command for setting:
SET AUDIO <1.> <2.> <3.> <4.> <5.> <6.> #PIN
1. Parameters: Speaker volume [0-9]
2. Parameters: Microphone sensitivity [0-9]
3. Parameters: Call sound melody [0-9]
4. Parameters: Call sound volume [0-9]
5. Parameters: Alarm volume [0-9]
6. Parameters: Remote control volume [0-9]
95