Conrad GKA100 Bedienungsanleitung Seite 79

Any changes in the vehicle that become necessary for the installation of the alarm
system or other components must be carried out in such a way that neither traffic
security nor the constructional and functional stability of the car are affected.
The operation permit may lapse even when sawing out the sheet part.
No parts must be installed in the airbag trigger area because this may cause injury
to the vehicle passengers in case of accident.
Never loosen the plugs for an airbag, which may cause unintended triggering of the
airbag or functional impairment.
If there are any doubts regarding selection of the installation site, inquire for
information from your car vendor.
Before drilling the bores, make sure that no electric cables, brake lines, the fuel tank
or similar are damaged.
When using tools to install your alarm system, observe the tool manufacturer's
safety information.
When installing the product, take into consideration the risk of accident which can
arise from devices being torn away in the case of an accident. Therefore, you should
secure every component in a place where it cannot be dangerous to passengers.
In doubt, installation must be performed by a specialist.
79