Vibration Alarm (Shock) - Conrad GKA100 Bedienungsanleitung

12.2.4 Vibration Alarm (SHOCK)

The product has an internal vibration sensor to recognise mechanical manipulation (parking
impact, broken windows, etc.).
The best sensitivity settings depend on many factors such as installation site, car body
connection, vehicle size, etc. and must be found individually by testing.
Sensitivity can be set from 0-10; the following applies:
0 = Off
10 = maximum sensitivity
Example:
Sensitivity should be set so that heavy vehicles driving by (e.g. truck) do not trigger alarm.
Configuration command:
SET SHOCK <sensitivity> #1513
Resetting to default settings (level 5):
RESET SHOCK #1513
Determined current settings:
TEST SHOCK #1513
102