Product Description - Conrad GKA100 Bedienungsanleitung

7. Product Description

The car alarm system can be used to monitor a vehicle. The primary task is not in frightening
the thief away via the speaker but via live transmission of an alarm message to up to 6 phone
numbers by text message.
If the sensors and external electronics (connected to the switching inputs) recognise any
impermissible interaction, various actions like alarm via text message or switching consumers
may be triggered.
The customer may at any time perform other actions by sending text message from his mobile
phone, e.g. determine the current GPS position (coordination or web link), request the status,
switch the relay, check the switching inputs or perform a „silent call" to hear what is currently
taking place inside the vehicle.
The microphone or speaker can be used to accept calls and call pre-set phone numbers.
Many transverse functions (switching relays when deactivating the alarm, the call causes an
answering text message with the current GPS position, etc) can be used by the customer to
configure the product as desired.
The GPS receiver is used to determine and monitor GPS zones (Area, GeoFence), i.e. places
where the product may be present.
The USB-interface, which is not mandatory for operation or configuration can be used by the
customer for firmware updates to receive further functions.
The product is secured against manipulation with an internal battery.
70