Conrad GKA100 Bedienungsanleitung Seite 116

Checking a programmed zone:
To check the programmed zones in the specified location, use the following command:
TEST GPSZONE <Location no.> #1513
Values from 1 to 10 are permissible for „Location no.".
Example:
TEST GPSZONE 3 #1513
The following text message is returned for confirmation:
GKA100 1.xx
GPS zone: 3/7
Latitude
49.549680N to 49.537480N
Longitude
011.924780E – 011.957910E

You may combine several zones to one corridor. The zone thresholds are along the
indicated longitudes and latitudes. Diagonal zones cannot be indicated. The zones
must overlap if they belong to one corridor.
116