Conrad GKA100 Bedienungsanleitung Seite 115


Observe that missing digits are filled in with „0".
Example: 3° 3.23' E = 003.032300 E
The GPS coordinates are indicated in degrees and minutes with six decimal digits
in the car alarm system. Data input is possible in the range of xx.000000° to
xx.999999°.
Example:
The command for zone monitoring must be entered as follows.
SET GPSZONE 49.549680N 011924780E 49.537480N 011.957910E #1513
The following text message is returned for confirmation:
GKA100 1.xx
GPS zone: 1/1 < ——Zone number
Latitude:
49.549680N to 49.537480N
Longitude:
011.924780E – 01.957910E

Observe that every command „SET GPSZONE" will add a new zone. If the storage
limit is reached, an error message will be returned:
Deleting all saved zones:
The following command deletes all saved zones:
RESET GPSZONE ALL #1513
Deleting one zone:
The following command deletes a single zone:
RESET GPSZONE <Zone no.> #1513
115