To verify the desired settings, use the following command:
TEST TIME #1513
or:
TEST DATE #1513
12.1.2 Administration of Phone Book (TEL, TEL1,...)
Up to 6 phone numbers can be programmed into the device. In case of alarm, a notification text
message is sent to each of these phone numbers. Additionally, only these phone numbers are
accepted for the INCALL function.
If the same number is in the list several times, it will receive the same text message as many
times.
The car alarm system generally can only process phone numbers in the international format.
Example: 0177/12131415 -> The following would be correct: +4917712131415
Sending text message commands to the car alarm system:
SET TEL1 +49111... #1513
SET TEL2 +49222... #1513
...
SET TEL6 +49666... #1513
There is the option of programming several phone numbers in a single command, e.g. 3 phone
numbers (TEL1 to TEL3):
SET TEL1 +49111... +49222... + 49333... #1513
After sending the command „SET TEL....", a text message answer with a list of saved phone
numbers is generated:
GKA100 1.xx
—————-
TEL1
+49111...
TEL2
+49222...
..... etc. ......
92