Automatic Submission (Gps, Gpsmap, Special Function) - Conrad GKA100 Bedienungsanleitung

12.4.4 Automatic Submission (GPS, GPSMAP, Special Function)

There is the option of having several GPS coordinates or map links sent automatically. This
permits displaying the vehicle's motion course.
Use the following command.
TEST GPS <Time> <Quantity> #1513
or:
TEST GPSMAP <Time> <Quantity> #1513
The parameter „Time" has the following meaning:
1-249: Time in minutes between the messages
250: 30 seconds
251: 15 seconds
The parameter „Quantity" represents the maximum number of text messages to be sent (range
to be set between 1-1000).
Example:
TEST GPS 2 3 #1513
The device sends three text message messages with the current GPS position at an interval
of two minutes.
TEST GPSMAP 2 3 #1513
The device sends three text message messages at an interval of two minutes with entry of the
position of your vehicle in a map.
If automatic transmission of the GPS data is to be terminated, send the following command to
the device:
RESET GPS #1513
or:
RESET GPSMAP #1513
112