Sim Card Insertion - Conrad GKA100 Bedienungsanleitung

9.3 SIM Card Insertion

The SIM card with the PIN number „1513" must be
inserted in the device as shown in the figure on the
right.
After insertion of the SIM card, the device switches on
automatically; this is signalled by the green flashing
GSM status LED (1).
First, the LED1 remains lit green (network search);
after a few seconds, the LED1 should start flashing
(network found, device ready for operation).
If the green LED does not start to flash, there is no
connection to the GSM network. In this case, the
network quality and function of the SIM card must be
inspected at the product site with a separate mobile
phone.
If the LED1 flashes red, there is an error when connecting to the GSM provider or the PIN
number is incorrect. In this case, the device must be reset to factory settings. Furthermore, the
SIM card (PIN/PUK/activation) must be inspected and the receiver quality at the device
position must be verified with a separate mobile phone.

If the device used to be used with another SIM card, there is the option of the PIN
number in the product being changed and no longer matching the PIN number of
the SIM card. In this case, reset the device to factory settings (section „Factory
Reset") and manually set the SIM card PIN in your mobile phone to PIN „1513".
The SIM card may have been locked in the meantime and must be unlocked with
the PUK.
82