Ordering Spare Parts; Service Information; Troubleshooting; Storage - Scheppach Pts400 Originalbetriebsanleitung

Please provide the following information in the event
of any queries:
• Type of current for the motor
• Machine data - type plate
• Motor data - type plate
Important note in the case of repairs:
For return delivery of the product for repair, please
ensure for safety reasons that it is free of oil and fuel
when it is sent to the service centre.

12.1 Ordering spare parts

Please provide the following information when order-
ing spare parts:
• Model designation
• Item number
• Type plate data
Spare parts / accessories
Air filter
Air filter sponge
V-belt
Cutting wheel
Water hose, cpl.

12.2 Service information

With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: Engine oil, spark plug, air filter, fuel
filter, diamond cutting wheel, V-belt
* may not be included in the scope of delivery!

15. Troubleshooting

Fault
Then engine does not start
The engine starts up but does
not have full power.
The engine runs erratically
Sooty or damp spark plug
Article no.:
5915201001
5915201002
5915201003
5915201004
5915201005
Possible cause
Incorrect start-up procedure
Contaminated air filter
Wrong spark plug electrode gap
Incorrect carburettor setting
www.scheppach.com

13. Storage

Store the product and its accessories in a dark, dry
and frost-free place that is inaccessible to children.
The optimum storage temperature lies between 5°C
and 30 ˚C.
Store the product in its original packaging.
Cover the product to protect it from dust or moisture.
Store the operating manual with the product.
• Remove the diamond cutting wheel (see chapter
8.1).
• Before storing the product for a longer period of
time and before shipping it, please observe chapter
12. Always empty the fuel tank and run the carbu-
rettor empty.
• Proceed particularly carefully when storing cutting
wheels:
- Clean and dry well.
- Always store flat.
- Moisture, frost, direct sunlight, high temperatures
and fluctuations in temperature must be avoided
otherwise there is a risk of breakage and splinters!

14. Disposal and recycling

Notes for packaging
The packaging materials are re-
cyclable.
packaging in an environmentally
friendly manner.
You can find out how to dispose of the disused
device from your local authority or city adminis-
tration.
Fuels and oils
• Before disposing of the device, the fuel tank and
the motor oil tank must be emptied!
• Fuel and engine oil do not belong in household
waste or drains, but must be collected or disposed
of separately!
• Empty oil and fuel tanks must be disposed of in an
environmentally friendly manner.
Remedy
Follow the instructions for starting
Clean the air filter
Clean spark plug and adjust electrode gap or
fit new spark plug
Have the carburettor adjusted and, if
necessary, clean the spark plug or replace it
with a new one
Please dispose of
GB | 43