Scheppach PTS400 Originalbetriebsanleitung Seite 29

Warning! The permissible speed of the abrasive cutting wheel must be equal to or
higher than the maximum spindle speed.
Warning! Danger of flying sparks. Fire hazard!
Warning! Risk of kick-back.
Warning! Danger of pulling away or climbing.
Warning! Hot surface - risk of burns!
Guaranteed sound power level of the device.
Pushed in - choke deactivated
Pulled out - choke activated
ON
On/off switch - "ON"
On/off switch - "STOP"
Direction of rotation of the spindle.
max. abrasive cutting wheel diameter.
max. spindle speed.
The product complies with the applicable European directives.
The product complies with the applicable Serbian directives.
Adjusting screws for carburettor:
L Low speed (do not change)
H High speed (do not change)
T Idle speed
www.scheppach.com
GB | 29