Replacing The Ship's Propeller - Reely Futterboot ARR Bedienungsanleitung


10.

Replacing the Ship's Propeller

Proceed as follows to replace the ship's propeller:
• Remove the lock nut with a suitable tool (not
included) (figure 7, item 1). To remove the nut,
turn it to the left while holding the ship propeller.
Attention!
The ship propeller is very sharp-edged. To avoid
injury when replacing, wrap the ship propeller with
a suitable cloth.
• Pull the ship's propeller from the shaft.
• Install the new ship's propeller on the shaft so that
the grooves of the ship's propeller latches in the
grooves of the drive shaft (figure 7, item 2).
Then secure the ship's propeller with the safety
nut removed first.
Figure 7, item 3 shows the water inlet for the water
cooling.
Figure 7
35