Assembly - Dantherm Rcc 130 Bedienungsanleitung

Übersetzung der originalbetriebs- und serviceanleitung

Vorschau ausblenden Andere Handbücher für RCC 130:

Inhaltsverzeichnis

Verfügbare Sprachen

INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS

Installation: Assembly

Assembly

Please proceed as follows to mount the unit vertically on a wall:

Vertical wall

1. Place the unit in a suitable position on the wall (see page 33).

2. Use a spirit level to ensure vertical alignment.

3. Drill two holes into the upper mounting bracket, insert the appropriate screws and

4. Drill two holes into the lower mounting bracket, insert the appropriate screws and

5. Before tightening the four screws firmly, press the unit down so that all the screws are

tighten them lightly.

seated in the upper part of the mounting bracket slots.

Fig. 31: Vertical wall mounting

Inhaltsverzeichnis