Dantherm RCC 130 Bedienungsanleitung Seite 31

INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Product description: Description of the components of the control unit
Connect the unit to a LAN port using a standard Ethernet cable with an RJ45 connector.
Connecting to LAN
If a non-prefabricated cable is used, first install a sufficient cable length through the house.
Mount the RJ45 connector using the standard Ethernet cable crossover terminology as
specified in T568B. These assembly instructions can be found on the internet, for example
on Wikipedia.
The unit can be controlled via a smartphone app (IOS and Android) if your unit is connected
to the same network via WiFi.
IP address assignment status Description
Dynamic IP
Static IP
If the unit is connected to a router with an integrated
DHCP server, it will automatically retrieve the IP address
from the router when the unit starts up.
The PC Tool allows you to assign a static IP address to the
unit.
31