Dantherm RCC 130 Bedienungsanleitung Seite 51

INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Maintenance and troubleshooting: Cleaning the interior of the unit
Cleaning the
condensation tray
and condensate
drain
Sharp edges!
The locks on the condensation tray may have sharp edges on which you can cut yourself.
• Wear protective gloves when inspecting and cleaning the condensation tray.
1. Remove the drain hose and turn all the depicted locks by 90°.
2. Remove the condensation tray. Note that the condensation tray may contain small
3. Make sure that the condensate drain in the condensation tray is not clogged.
4. Clean the condensation tray with soapy water and a brush or cloth.
CAUTION
Fig. 43: Opening the locks
amounts of water when mounted on the ceiling.
Fig. 44: Removing the condensation tray
51