Dantherm RCC 130 Bedienungsanleitung Seite 17

USER MANUAL
Maintenance and care:
1. Remove the filters and check them after the filter alarm has been triggered.
2. Check the filters for dirt (after six months). Replace the filters if you notice heavy soiling
3. Replace the filters after 12 months, regardless of whether they are clogged or an alarm
4. Insert the clean filters into the unit. Ensure that the filters are inserted the right way
5. Press the
Fig. 2: Replacing the filters
or clogging. Note: Always replace both filters, even if only one filter is clogged, to avoid
an imbalance in the airflow passing through the unit.
has been triggered.
round. The arrow on the filters must point inwards.
button for 5 seconds.
ð The filter alarm is stopped and the filter alarm timer is reset.
ð A brief acoustic signal will be emitted indicating that the filter alarm timer has been
reset correctly.
Fig. 3: Stopping the filter alarm
17