Assembly; Wall Mounting - Dantherm Rcv320 P1 Benutzerhandbuch

INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
Installation: Assembly

Assembly

Wall mounting

1. Fix and level the wall rail with the dimensions shown. Note: Make sure to use suitable
2. Mount the two spacers on the bottom and the back of the unit.
3. Mount the vibration damper (1) to the wall rail and lift the unit onto the wall rail.
screws and wall plugs.
516 mm
220 mm
600 mm
Fig. 39: Mounting the wall rail
Fig. 40: Mounting the spacers
Fig. 41: Mounting the vibration damper
42 mm
1
39