Assembly - Dantherm Rcv320 P1 Übersetzung Der Originalanleitung

Assembly

Wall mounting
40
1. Fix and level the wall rail with the dimensions shown. Note: Make sure to use suitable
screws and wall plugs.
516 mm
220 mm
600 mm
Fig. 39: Mounting the wall rail
2. Mount the two spacers on the bottom and the back of the unit.
Fig. 40: Mounting the spacers
3. Mount the vibration damper (1) to the wall rail and lift the unit onto the wall rail.
Fig. 41: Mounting the vibration damper
INSTALLATION AND SERVICE MANUAL FOR PROFESSIONALS
42 mm
1
Installation: Assembly