Settings, Operating Menu - Kessel SE NS 2 Bedienungsanleitung

5

Settings, operating menu

General information
The menu prompting has an operating and a standby mode. In the operating mode, system settings (
61 ) can be displayed and adjusted on the display. If over a period of approx. 60 seconds none of the keys are
pressed, standby mode is activated automatically, the background lighting of the display is then switched off.
Navigation keys for the menu
66 Cursor up
67 Cursor
down
68 ESC
72 OK
Activating operating mode
• Press the OK <72> key on the control panel, the background lighting
of the display lights up and the start window
• Press OK <72>, level 1 of the menu (
struktur") is activated.
Note: The display can vary depending on the configuration.
The number of the respective menu level <63> is shown as a figure in
the top line on the display.
010-913
Settings, operating menu
Scrolling in the menu
Scrolling in the menu
Deletion of an entry, back
Confirmation of an entry, next level
5.1 on page 61, „5.1 Menü-
➲
(System info) appears.
60 / 108
Fettabscheider/Grease Seperator „SE"
66
68
67 72
Ill. [13]
Fettabscheider/Grease Seperator „SE"
63
Datum --,--,--
Uhrzeit --,--,--
Niveau:
-- mm
Pumpe I: Aus
Pumpe II: Aus
Fehler/Meldung/Ereignis (Statuszeile)
72
Ill. [14]
5.1 on page
➲
2017/10