Setting the disposal interval and heating time
Select Menu 3. Settings / 3.1 Parameters / 3.1.1 Heating.
•
The interval can be set either to repetition every N days or to a specific weekday.
No matter how long the heating duration is set, it automatically ends at the end of the day.
Example: Start of heating 23:30, duration
•
Bei
Start
enter the time of day at which heating should begin.
Duration
•
Bei
Setting the mixing time
•
Select Menu 3. Settings / 3.1 Parameters / 3.1.2 Mixing.
•
Set mixing time to 10 min. (factory recommendation). Mixing is started automatically such that it ends at the
same time as the heating period.
Setting the flushing time
•
Einstellungen / 3.1 Parameter / 3.1.3 Spülen
When the flushing time/mixing time/heating time is set, the respective "Value" parameter must be able to be ch-
anged from 1-9.
Up to 9 different starting points can be programmed using this parameter.
2017/10
the time in minutes (at least 120 min.) during which heating should take place.
Operation
auswählen.
120
min., end of heating time at 00:00, after
57 / 108
30
minutes
010-913