Tonearm Height Adjustment - Clearaudio Unity Bedienungsanleitung

User manual / Bedienungsanleitung

4.2 Tonearm height adjustment

The following settings require to mount the cartridge on the headshell.
Always follow the cartridge manufacturer's instructions.
Leave the stylus protector on your cartridge to avoid any damages!
Now you can connect the respective signal cable with the matching color pins of the cartridge.
Please note the following colour coding:
Red:
right channel / R+
Green:
right channel / R-
left channel / L+
White:
left channel / L-
Blue:
Connect the pins of your cartridge to the jacks of the headshell or tonearm cable, taking care not
to use too much force.
Use suitable precision pliers or tweezers for assistance if necessary.
In addition, the counterweight must be roughly preset; for this purpose, a pair of counterweights
included in the scope of delivery must be installed.
LOW = 2x 14g = 28g
MID = 2x 18g = 36g
HIGH = 2x 32g = 64g
The choice of counterweight pair depends on the weight of your cartridge.
For the next steps, we recommend installing the middle counterweight with a total of 36g at the
beginning. I f the counterweight does not keep the tonearm level, change the weight to the lighter/
heavier counterweight pair.
The counterweights are attached at the end of the tonearm tube using a magnetic mount.
Pic. 15:
Mounting the counterweights
Page / Seite 14
© clearaudio
electronic GmbH, 2024-10