User manual / Bedienungsanleitung
4.4 Fine adjustment of the tracking force
As described under point 4.2, the choice of the counterweight pair depends on the cartridge's own
weight.
Unity
The
tonearm comes with 3 pairs of counterweights, which can be easily attached and replaced,
Pic. 20:
Mounting the counterweights
I ncrease or decrease the cartridge weight by turning the adjustment wheel at the end of the
tonearm.
Pic. 21:
Adjustment of the tracking force
I f you cannot achieve the desired tracking force with the middle pair of counterweights, switch to
the lighter/ heavier pair.
Made in Germany
using a magnetic holder.
LOW =
2x 14g = 28g
MID =
2x 18g = 36g
HIGH =
2x 32g = 64g
Set the correct tracking force of your cartridge according
to the manufacturer's instructions.
To check the correct tracking force, we recommend
the digital pickup scale "Weight Watcher touch" from
Clearaudio (Art. No.: AC163; also available at www.
analogshop.de).
Green arrow = higher tracking force
Red arrow = w eaker tracking force
Page / Seite 17