Clearaudio Unity Bedienungsanleitung Seite 19

User manual / Bedienungsanleitung
4.6 Setting the VTA
Pic. 24: Locking screw VTA adjustment

Pic. 25:
Adjustment of the VTA
We recommend to re-check all settings again and correct them if necessary before connecting the
tonearm to your phono pre-amplifier.
We wish you a lot of fun with your new
Clearaudio
Your team
Made in Germany
To adjust the height of the tonearm, first loosen the fixing unit
on the tonearm base.
Turning the VTA screw counterclockwise lowers the tonearm;
the scale on the VTA becomes negative.
Turning the VTA screw clockwise raises the tonearm; the
scale on the VTA becomes positive.
You can even adjust the height of your tonearm while playing!
After adjusting the height, tighten the locking screw on the
tonearm base again.
The tonearm adjustment is now complete.
Unity
tonearm.
Page / Seite 19