Clearaudio Unity Bedienungsanleitung Seite 20

User manual / Bedienungsanleitung
5. Troubleshooting
I f you have a problem with your
operation.
Please contact your dealer if the error persists!
Never try to open the unit and/ or repair it yourself, this w ill void the w arranty!
Error
I s the record or the stylus dirty or
damaged?
Needle bounces
Has the tracking force been set
or slides across
too high?
record
I s the record deformed or
scratched?
I s the turntable leveled?
Tonearm lift
The tonearm has not been used
does not low er
for a long time, which means that
or low ers very
the greas in the tonearm lift can
harden and lower with difficulty.
slow ly
Page / Seite 20
Unity
tonearm, check the possible causes to rule out incorrect
Cause
Clean the record / or the cartridge.
offers many helpful accessories for care and
cleaning. I n the event of damage, we recommend
an assessment by a specialist and, if necessary,
an exchange.
Adjust the tracking force.
Use only a suitable gauge! For example
Clearaudio
„Smart Stylus Gauge".
Use a record clamp or replace the record.
Check the alignment of the turntable and adjust
if necessary.
Operate the lift about 4-5 times to loosen the
grease in the tonearm lift and the lift bar will lower
evenly again.
Measure
„Weight Watcher touch" or
© clearaudio
electronic GmbH, 2024-10
Clearaudio