Clearaudio concept Bedienungsanleitung Seite 7

User manual / Bedienungsanleitung
4. Important notes
4.1 Adjustment of the tracking
Never check or adjust the tracking force when there is a record on the platter.
Always remove the record first. The pre-adjusted and recommended tracking force for the Clearaudio
concept MMcartridge is 2.2g and for the Clearaudio
4.2 Adjustment of the tonearm
Since everything on the turntable
and tested, including
is usually no need to change any parameters on the
concept turntable. If you wish to change the height
of your tonearm, please refer to your nearest qualified
dealer or service personnel.
Your dealer can make the
loosening the locking screw on the side of the tonearm
base of your turntable.
Clearaudio assumes no liability for incorrect
persons attempt these adjustments.
4.3 Adjustment of the anti-skating
Again, since everything
assembled and tested, including tonearm and cartridge,
there is usually no need to change any of the concept
turntable parameters.
If you wish to change your cartridge and to adjust the
anti-skating force, please refer to your nearest qualified
dealer or service personnel.
Your dealer will find the anti-skating
underside of the turntable.
Clearaudio assumes no liability for incorrect
persons attempt the above adjustments.
Made in Germany
force
height
is pre-assembled
tonearm and cartridge,
height adjustment
force
on the turntable
adjuster on the
concept mccartridge
there
by
Pic. 9: Adjustment of the tonearm height
handling or any damage caused if non-qualified
is pre-
Pic. 10: Adjustment of the anti-skating
handling or any damage caused if non-qualified
clearaudio
Loving music
is 2.2g (± 0.2g).
Page / Seite 7