Fine Adjustment Of Tonearm; Adjustment Of The Vta - Clearaudio TT3 Bedienungsanleitung

User manual / Bedienungsanleitung
Please only pre-adjust the tracking force of the cartridge.
The correct setting will be made at the end of the tonearm settings.
Use the 1.5mm hex wrench to tighten the counterweight fixing screws.
To tighten the screws, we recommend lifting the tonearm back to the vertical position (see Pic. 21).
Pic. 21: Fixing the counterweight
To check the tracking force, we recommend the Clearaudio Weight Watcher digital cartridge weight
(Art. No. AC094, also available at www.analogshop.de).
7. Fine adjustment of the tonearm
7.1 Adjustment of the VTA (tonearm height)
The Clearaudio linear gauge is suitable for adjusting the tonearm height, since it comes with same
thickness as a record.
Place the Clearaudio linear gauge over the turntable spindle and align it so that it points towards
the tonearm base.
Pic. 22: Placing the Mini Level Gauge
Made in Germany
Check the tonearm height by placing the Mini Level Gauge
(included) on the headshell.
Place the gauge centered on the top of the headshell of the
raised cartridge (Pic. 22).
13