Avtech AVC792PV Bedienungsanleitung Seite 20

/ / /
/
/
/
/
3.3 Main Menu
Right-click anywhere on the screen to show the main menu as follows, and right-click
again to exit.
For details about the menu structure, please refer to "APPENDIX 4 MAIN MENU
STRUCTURE" at page 69.
Main Menu
All manuals and user guides at all-guides.com
Click to enter the camera main menu.
Camera Menu For details about each camera menu, please refer to its
own user manual.
Click to confirm your selection / enter the menu.
Enter
Up / Down / Left /
Click to move your selection up / down / left / right, or
change settings.
Right
This two buttons are designed for the PTZ camera
which uses Pelco-D to control. To know the actions after
Iris + / Iris -
clicking Iris + and Iris -, please refer to the camera's
user manual.
Click to zoom in on the image to the largest / zoom out
Zoom in / out max
on the image to its original size.
Zoom in / out Click to zoom in / out the image.
Focus near / far Click to adjust the focus of the image.
Click to activate the auto function.
Auto mode
Before using it, you need to assign a specific function
that will be enabled when "
please refer to the user manual of the PTZ camera.
Click to enter the PTZ preset point you want to see.
Preset point
QUICK START
DATE SETUP
SYSTEM
EVENT
INFORMATION
ADVANCED
CONFIG
SCHEDULE
SETTING
.
14
GUI DISPLAY WITH USB MOUSE CONTROL
" is clicked. For details,
Click to set the status display, image
settings, and date & time.
Click to set the date display and
daylight saving.
Click to set the system configurations.
Click to enter the event search menu.
Click to set CAMERA, DETECTION,
ALERT, NETWORK, DISPLAY,
RECORD, DEVICES & NOTIFY.
Click to set record timer, detection
timer & alarm timer.