Linde T 20 R 01 Bedienungsanleitung Seite 7

Your
Linde low level pallet truck
otters
the best in economy,
safety and driving convenience. Therefore it lies mainly in
the hands of the operator to preserve the qualities of the
trucks for a long and profitable service life and to make
full use of their benefits on the job.
For options, follow the operating instructions supplied
with that equipment. Follow the operating instructions
for your truck and perform the services specified in the
inspection and maintenance schedule regularly, on time
and with the specified oils and lubricants.
This manual teils you all you must know about starting,
running, servicing and maintaining your truck.
The terms "front", "rear", "Iett" and "right" refer to the
position in which the item is installed in the truck,
looking forward in the travel direction (load trailing).
Approved applications
Your Linde truck is designed for transporting and lifting
the loads specified in the load capacity diagram.
In particular we refer to the accompanying VDMA booklet
"Rules forthe Normal and Proper Useof Industrial Trucks".
The rules for the normal and proper use of industrial
trucks must be followed under all circumstances by the
responsible persons, in particular by the operators and
service personnel.
The user, and not the manufacturer Linde, is liable for
any hazards arising from unapproved applications.
If you wish to use the truckfor applications not mentioned
in the guidelines, please first contact your Linde distribu-
tor before supplementing or retrofitting it for this pur-
pose.
No changes, in particular no conversions or retrofits,
may be made to the truck without the prior permission of
the manufacturer.
The servicing may only be performed by qualified per-
sonnel authorised by Linde.
Keep arecord of all maintenance services, otherwise
your warranty may become void.
Technical note
These operating instructions or excerpts thereof may
only be copied, translatedor transmitted to third parties
after prior written approval by the manufacturer.
Linde pursues a policy of continuous improvement in the
design and construction of its products. The illustrations
and technical details regarding design, equipment and
engineering of trucks are subject to change or modifica-
tion as a result of technological progress.
No liability based on the specifications, illustrations and
descriptions contained in this operating manual will be
accepted.
Please submit all enquiries concerning your truck and all
orders for spare parts to your authorised distributor,
making sure to state your correct shipping address.
For repairs use only genuine Linde spare parts to ensure
that your truck will retain its original technical standard.
When ordering spare parts, specify the part number and
state the following truck data:
Truckmodel: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Serial no.:/yearbuilt: _ _ _ _ _ _ _ _ _ _ _ _ _ _
Takeover date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
When taking over the truck, transfer this information
from the type plates into this manual.
Truck takeover
Every truck undergoes careful inspection before leaving
the factory in order to make sure that it will be in
satisfactory condition and fully equipped as ordered
when delivered to the customer. Your authorised dealer
is under obligation to re-inspect the truck before delivery
and to hand it over in good order.
With a view to avoiding later complaints and inconveni-
ence to customers, you are requested to ascertain that
the truck is in satisfactory condition and fully equipped
at the time of delivery and to acknowledge the proper
handing/taking over of the truck.
The following technical documents are supplied with
each truck:
1 Operating instructions
1 EC Certificate of conformity
(manufacturer certifies that the industrial truck con-
forms to the EC directives for machines)
1 Rules for the Normal and Proper Use of Industrial
Trucks (VDMA)
Wishing you satisfactory operation,
Your
Linde AG
Werksgruppe Flurförderzeuge
und Hydraulik
Aschattenburg
3