Chain Spray - Linde T 20 R 01 Bedienungsanleitung

RECOMMENDED OllS AND lUBRICANTS
Hydraulic cil
Recommended hydraulic oil tor light and normal duty:
Hydraulic oil HLP ISO VG 46 to DIN 51524 T.2, average oil
temperature 40°C - 60 °C (tactory tilling).
NOTE
The recommended oil can only be a guideline.
In case ot doubt we recommend contacting your author-
ised distributor.
Recommendations trom representatives ot the mineral oil
industry should also be checked with your authorised
distributor.
Only the above-mentioned mineral oilis tactory approved.
Using or adding other hydraulic oils can lead to costly
damage.
Gear cil
Preterably use SAE 80 W - 90 API GL5, also suitable is
SAE 85 W - 90 API GL4 90 (acc. to DIN 51512).
Grease
Linde heavy-dutv lithium-base grease with MOS
2
and
EP additives.
Designation acc. to DlN 51825 KPF2K-20 (reter to Parts
Catalogue tor order number).
A mixture ot grease types on any other base than
lithium is not allowed.
Battery grease
Non-acidic grease (Vaseline)
Chain spray
Linde chain spray (refer to Parts Catalogue tor order
number)
87