Werbung
10
|
Betriebsfunktionen
10
Betriebsfunktionen
10.1
System Commands
Es können verschiedene System-Kommandos genutzt werden um den Sensor direkt anzuspre-
chen.
Detaillierte Informationen zu den im Folgenden aufgeführten Angaben finden Sie in Kapitel
hang
[} 57].
IO-Link Zugriff: System Commands
Name
Application Reset (System
Command)
Restore Factory Settings
(System Command)
Back-to-box (System Com-
mand)
22
Index Subindex Description
2
–
2
–
2
–
Betriebsanleitung
Write value 129 to System Command.
The parameters of the technology-specific ap-
plication are set to default values. The identifi-
cation parameters remain unchanged. An
upload to the data memory of the master is
carried out if this is activated in the port confi-
guration of the master.
Write value 130 to System Command.
The device parameters are reset to the facto-
ry settings.
Note: A download of the data memory can be
carried out the next time the device is swit-
ched on and overwrite the factory settings!
Write value 131 to System Command.
The device parameters are set to the factory
default values. Communication is blocked un-
til the next switch-on process.
Note: Disconnect the device directly from the
master connection.
Baumer
An-
OM60 IO-Link | V2
Werbung
