Scheppach 3908301915 Originalbetriebsanleitung Seite 30

1. Introduction
MANUFACTURER:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we wish you much pleasure and success in working
with your new device.
NOTE:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists,
• Installing and replacing non-original spare parts,
• Application other than specified.
Note:
Read the whole text of the operating manual before
assembly and commissioning.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the de-
vice, for avoiding danger, for minimising repair costs
and downtimes, and for increasing the reliability and
extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must
be read and carefully observed by all operating per-
sonnel before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
30 | GB
2. Device description (Fig. 1)
1. Transport bar
2. Protective frame
3. Air filter
3a. Paper filter
3b. Foam filter
3c. Air filter housing cover
4. Fuel filler cap
4a. Fuel filter insert
5. Fuel tank
6. Throttle
7. Choke lever
8. Ventilation hose
9. Fuel valve on the engine
10. Engine
11. Pull starter
12. Oil drain screw
13. Oil dipstick
14. Rammer foot oil drain screw
15. Guide bar
16. On/off switch
17. Bottom rammer
18. Rammer foot
19. Fuel valve on the fuel tank
20. Transmission
21. Adapter plates (2x)
22. Spark plug connector
22a. Spark plug
23. Silencer
24. Transport roller
3. Scope of delivery (fig. 2)
• Vibration rammer (A)
• 4 x Hexagon bolts M10x25 (B)
• 1 x Hose clamp (C)
• 2 x Hexagonal bolts (D)
• 1 x Transport device (E)
• 2 x Cable ties (F)
• 1 x Spark plug wrench (C)
• 1 x Protective frame (2)
• 1 x Fuel tank (5)
• 2 x Adapter plates (21)
• 1 x Operating manual
4. Proper use
The machine complies with the applicable EC
machinery directive.
The machine is a motor-driven tool and is suitable
for compacting loose soil, clods of earth and gravel,
thereby creating a firm and stable base for founda-
tions, sub-concrete and other subsoil consolidation.
However, the machine is not suitable for compacting
soils with a high clay content.
www.scheppach.com