Werbung
210
EMV
Guidance and manufacturer's declaration – electromagnetic emissions (IEC 60601-1-2)
AUTOCON
®
III 400 is intended for use in the electromagnetic environment specified below. The customer or user of the AUTOCON
that it is used in such an environment.
Interference emissions measurements
HF emissions acc. to CISPR 11
HF emissions acc. to CISPR 11
Harmonic emissions acc. to IEC 61000-3-2
Voltage fluctuations/flicker emissions acc. to
IEC 61000-3-3
Basic EMC standard or
Phenomenon
ELECTROSTATIC DISCHARGE
IEC 61000-4-2
Radiated RF EM fields
IEC 61000-4-3
Proximity fields from RF
IEC 61000-4-3
wireless communications
equipment
RATED power frequency
IEC 61000-4-8
magnetic fields
EMC
Compliance
Group 2
Class A
Class A
Complies
Table 4 – ENCLOSURE PORT (according to IEC 60601-1-2)
Professional healthcare
test method
facility environment
±8 kV contact
±2 kV, ±4 kV, ±8 kV, ±15 kV air
3 V/m
80 MHz – 2.7 GHz
80 % AM at 1 kHz
See table 9
30 A/m
50 Hz or 60 Hz
CEM
®
III 400 must make sure
Electromagnetic environment – guidelines
The AUTOCON
®
III 400 must emit electromagnetic
energy in order to perform its intended function.
Nearby electronic devices may be affected.
The AUTOCON
®
III 400 is suitable for use in all
establishments other than domestic and those
directly connected to the public low voltage power
supply network that supplies buildings used for
domestic purposes.
– Professional healthcare facility
environment –
IMMUNITY TEST LEVELS
HOME HEALTHCARE
ENVIRONMENT
Not applicable since released only
for professional healthcare facility
environment
Werbung
