two trees TS2 Benutzerhandbuch Seite 25

Troubleshooting Port Detection Issues
If you're unable to locate the appropriate port under "Ports," you might need to try the
following methods:
Method 1: Click on "Tools" in the menu to install the CH340 driver (Note: This option might
not be available in certain software versions).
Method 2: Copy the "CH340ser.exe" file from the TF Card (USB flash disk) to your computer
and proceed with installation.
Important Instructions for Laser Head Maintenance and Lens Cleaning
1. After a period of laser head usage, it's important to clean the lens positioned below the
laser head's light outlet. This maintenance ensures consistent cutting performance.
2. Lens cleaning should only be performed when the machine is powered off to avoid laser-
related risks.
3. Post-lens cleaning, allow the lens to air-dry naturally for approximately 3-5 minutes
before powering on. This precaution prevents potential lens breakage due to residual
moisture upon activation.
4. For further guidance, scan the QR code in the manual to access video tutorials.
25