two trees TS2 Benutzerhandbuch Seite 22

Adjusting Picture Parameter, Engraving Mode and Engraving Quality
1. LaserGRBL empowers the adjustment of attributes like sharpness, brightness, contrast,
and highlights for the selected image. During this adjustment, a preview window displays
the effects, allowing you to fine-tune them to your preference.
2. When selecting the engraving mode, options typically include "Line-to-line Tracking" and
"1Bit Shaking." "1Bit Shaking" is particularly suited for engraving grayscale images. For
cutting purposes, opt for "Vector Diagram" or "Center Line."
3. Engraving quality pertains to the laser scanning's line width. This parameter hinges on the
engraving machine's laser spot size.
Note: The recommended range for engraving quality is between 12 and 15. Diverse materials
react differently to laser exposure, hence the specific value relies on the exact engraving
material.
4. At the lower part of the preview window, features such as rotation, mirroring, and cutting
of the image are available. Once the aforementioned settings are in place, proceed to the
next step to configure engraving speed, energy, and size.
Color adjustment;
Intensity adjustment
Choose engraving mode
Quality: 12-15 (recommended)
Direction adjustment;
Pattern cutting
22