Bosch MaxoMixx MS8CM6 Serie Originalbetriebsanleitung Seite 17

Controls
Controls
Controls
Speed setting
For continuous speed adjustment. Set the
rotary selector between ● (lowest speed) and
12 (highest speed).
On button
To use the appliance at the preselected speed.
Turbo button
To use the appliance at maximum speed.
Note: The appliance remains switched on as
long as one of the buttons is pressed.
protection Overload
Overload protection
If the appliance switches itself off during
protection
the overload protection device has been
activated.
Remove the mains plug and leave the appliance
to cool down for approx. 1 hour to deactivate
the overload protection device. Note: If the
fault cannot be eliminated, please contact
customer service.
en Blender foot
footBlender
Blender foot
footBlender
Note: The blender foot is not suitable for
preparing purées consisting solely of potatoes
or foods with a similar consistency.
Stainless-steel blender foot
The blender foot is suitable for the following
purposes: Making drinks
 Making pancake batter, mayonnaise, sauces
and baby food
 Puréeing cooked food, e.g. fruit, vegetables,
soup
footblender the
Processing food with the blender
foot
footblender the
with food
with food
Notes
 Solid foods should always be cut up and
cooked until soft before processing, e.g.
apples, potatoes or meat.
 Use the universal cutter for cutting up raw
food without adding liquid, e.g. onions,
garlic or herbs.
 Before processing the food in a pan, take the
pan off the heat.
→ Fig.
Mayonnaise
Sample recipe Mayonnaise
Mayonnaise
 1 egg (egg yolk and egg white)
 1 tbsp mustard
 1 tbsp lemon juice or vinegar
use,
Overload
 200-250 ml oil
 Salt and pepper to taste
Making mayonnaise
Notes
 When using the blender foot, mayonnaise
can only be made with whole eggs (egg
white and egg yolk).
 When making mayonnaise, air underneath
the blender foot prevents the ingredients
blending together well. To achieve an
optimum result, check that the air can
escape before you start mixing.
→ Fig.
examples
Application examples
Always observe the maximum quantities
examples
processing times in the table. After each
operating cycle let the appliance cool down to
room temperature.
→ Fig.
cleaning
Processing
Processing
-
2 9
recipe Sample
recipe Sample
-
10 14
Application
15
of Overview
and
Application
17