JMA MOVE GO Bedienungsanleitung Seite 6

JMA
MOVE GO
2. SAFETY MEASURES
2.1 REGULATIONS
The Move Go key cutting machine and its safety devices are
compliant with Directive 2006/42 EC on Machinery.
This manual cites all the safety regulations that the user
must respect when installing and operating the machine.
Failure to follow these instructions may compromise the
safety conditions provided for during design and testing.
When used for the purpose for which they have been desig-
ned, all machines bearing the CE mark are compliant with
EU Directive 2006/42 EC on Machinery.
2.2 SAFETY DEVICES
1. The machine operator must know and
follow the instructions provided in this
manual.
The Move Go key cutting machine is fitted with safety and
other protective devices that define the user operation area
in order to guarantee their safety.
2.2.1 User protection
- Safety screen that protects against possible accidental
activation of the master switch.
- Anti-swarf screen. The operator must still wear safety gog-
gles even though this device is present.
- Enclosure for the lower section, to prevent contact with the
electrical components inside the machine.
KEY CUTTING MACHINE
2.2.2 Personal protection equipment
When operating or maintaining the Move Go machine, users
must wear the following personal protective equipment:
- CLOTHING: Those responsible for maintaining and ope-
rating any key cutting machine should wear protective clo-
thing that meets all the basic safety requirements currently
in effect. On wet floors, users should wear safety shoes with
a non-slip sole.
- SAFETY GOGGLES: The operator should wear safety gog-
gles over the eyes during the duplication stages of operation.
2.2.3 Safety signs and symbols
The Move Go key cutting machine uses the following safety
signs and symbols:
1.
2.
3.
4.
5.
Safety goggles must be worn
Read the instruction manual before opera-
ting the machine
WARNING! Hazardous operation
WARNING! Rotating tool
WARNING! Electrical voltage