3M PELTOR WS LiteCom Pro III Headset Bedienungsanleitung Seite 10

3M™ PELTOR™ WS™ LITECOM PRO III HEADSET
MT73H7A4D10EU, MT73H7B4D10EU, MT73H7P3E4D10EU,
MT73H7A4D10EU GB, MT73H7B4D10EU GB,
MT73H7P3E4D10EU GB
MT73H7B4D10EU-50, MT73H7F4D10EU-50,
MT73H7P3E4D10EU-50
1. INTRODUCTION
Congratulations and thank you for choosing PELTOR
communication solutions headset!
1.1. INTENDED USE
These headsets are intended to provide workers with protection
against hazardous noise levels while allowing the user to
communicate with built-in two-way radio or Bluetooth and
hear the surroundings via the ambient microphones. It is
expected that all users read and understand the provided user
instructions as well as be familiar with the use of this device.
1.2. CARRIER
The word carrier used in this document refers to head
protection, face protection and/or non-protective devices.
2. SAFETY
2.1. IMPORTANT
Please read, understand, and follow all safety information in
these instructions prior to use. Retain these instructions for
future reference. For additional information or any questions,
contact 3M Technical Services (contact information listed on
the last page).
2.2. INTRINSIC SAFETY
The 3M™ PELTOR™ WS™ LiteCom Pro III Headset,
MT73H7B4D10EU-50, MT73H7F4D10EU-50 and
MT73H7P3E4D10EU-50 has been certified to be intrinsically
safe for use in potentially explosive atmospheres. The user is
responsible for ensuring that the 3M™ PELTOR™ WS™
LiteCom Pro III Headset and accessories are used in the
appropriate atmospheres as defined by the approved area
classifications and according to the user instructions. Failure
to do so may result in serious injury or death. See separate
Safety Guide included in the product box for more
information.
If there is any risk that the safety or integrity of the unit has
been compromised, the unit must be taken out of operation
immediately and removed from the potentially explosive
atmosphere without delay. Action must be taken to prevent
the device from being accidentally placed into operation
again. Contact 3M Technical Services for service and repair.
!
WARNING
To reduce the risk of igniting an explosion which, if not
avoided, could result in serious injury or death:
• Ensure that the 3M™ PELTOR™ WS™ LiteCom Pro III
Headset, MT73H7B4D10EU-50, MT73H7F4D10EU-50,
MT73H7P3E4D10EU-50, and any intrinsically safe
accessories are only used and stored in the classified areas
consistent with the marked equipment ratings.
• Never connect electronic components or devices to the
headset in a potentially explosive environment.
• Only connect to the headset the 3M™ PELTOR™ Spare
Parts and Accessories listed in the User Instructions.
SUBSTITUTION OF COMPONENTS MAY IMPAIR
INTRINSIC SAFETY.
• Only use the 3M™ PELTOR™ Battery ACK082,
3M™ PELTOR™ Charging Cable AL2AH, and
3M™ PELTOR™ Power Supply FR08.
• Never change or charge the ACK082 battery in a potentially
explosive atmosphere.
• Do not use headset or accessories if they are damaged or
malfunctioning in any way.
• Only use 3M™ PELTOR™ Authorized Service Centers for
service and repair.
!
WARNING
• This hearing protector helps reduce exposure to hazardous
noise and other loud sounds. Misuse or failure to wear
hearing protection at all times when exposed to hazardous
noise may result in hearing loss or injury. For correct use,
consult supervisor and User Instructions, or call 3M
Technical Services. If your hearing seems dulled or you hear
a ringing or buzzing during or after any noise exposure
(including gunfire), or for any other reason you suspect a
hearing problem, leave the noisy environment immediately
and consult a medical professional and/or your supervisor.
Failure to follow these instructions may result in serious
injury or death:
a. Listening to audio communication may reduce your
situational awareness and ability to hear warning signals.
Stay alert and adjust the audio volume to the lowest
acceptable level.
b. This hearing protector provides an entertainment audio
facility. Listening to music or other audio communication may
reduce your situational awareness and ability to hear
warning signals at a specific workplace. Stay alert and adjust
the audio volume to the lowest acceptable level.
c. To reduce the risks associated with igniting an explosion, do
not use non-intrinsic safe products and accessories in a
potentially explosive atmosphere.
Failure to follow these instructions may reduce the
protection provided by the earmuff and may result in
hearing loss:
a. 3M strongly recommends personal fit testing of hearing
protectors. Research suggests that users may receive less
noise reduction than indicated by the attenuation label
value(s) on the packaging due to variation in fit, fitting skill,
and motivation of the user. Refer to applicable regulations
and guidance on how to adjust attenuation label values. In
the absence of applicable regulations, it is recommended
that the attenuation label value(s) be reduced to better
estimate typical protection.
b. Ensure the hearing protector is properly selected, fit,
adjusted, and maintained. Improper fit of this device will
reduce its effectiveness in attenuating noise. Consult the
enclosed instructions for proper fit.
EN
1