Reheat Function - Tefal Rk812110 Bedienungsanleitung

REHEAT FUNCTION

• This function is intended to reheat only cooked food.
• Press «Menu» key to select function «Reheat». The screen displays the
default cooking time, the light of «Start» flickers red.
• Press «Temperature / Timer» key to active the time setting function and
then press «<» and «>» to change the cooking time.
• Press «Start» key. The multicooker enters into «Reheat» cooking status,
the light of «Start» lights up and the screen displays the remaining time.
• At the end of cooking, the buzzer will ring three "bip", the multicooker
will enter keep warm status with the "Keep Warm" indicator turning on
and the screen will start to count the time of keeping warm.
CAUTION
• The cold food should not exceed 1/2 of the cooker's volume. Too
much food cannot be thoroughly heated. Repeated use of "Reheat"
or too little food will lead to burnt food and hard layer at the bottom.
• It is recommended not to reheat thick porridge, or it may become
pasty.
• Do not reheat long-stored cold food to avoid smell.
KEEP WARM/CANCEL FUNCTION
There are 2 different functions of this key: Keep warm and Cancel.
1. Keep warm function:
1.1 Manual Keep warm:
You can press «Keep warm/Cancel» key manually, the light of "Keep
warm/Cancel" turns on, the multicooker enters into keep warm status.
1.2 Automatic keep warm:
The multicooker will enter "keep warm" status automatically at the end of
the cooking (certain menus are exluded). The buzzer will ring three "bip",
the multicooker will enter automatically into keep warm status with the
"Keep Warm" indicator turning on and the screen will start to count the
time of keeping warm.
13
In case that you need to pre-cancel the automatic keep warm when
the cooking will be finished : long press «Keep warm» for 5 s before
starting the cooking program.
If you want to reput automatic keep warm, press again during 5s the
keep warm button.
2. Cancel function:
• Press "Keep warm/Cancel" key to cancel all setting data and back to
standby status.
Recommandation: in order to keep the food in good taste, please
limite the holding time within 12h.
DIY FUNCTION
• "Do It Yourself" function is to memorize your favorite cooking choices.
• Press «DIY» key to select DIY function under standby status, the
multicooker will first enter "DIY" setting status with the screen
displaying the default cooking time, and the light of "Start" flickering.
• 2 possibilities for DIY setting :
− if you want to have stable temperature and time for your program ,
press "Temperature / Time" to defined your setting.
− If you want to use a menu as basis of your program, press menu key
to select your desiring cooking program. After select you menu, you
can modify it setting thanks to "Temperature / Time".
• At the end of cooking, the buzzer will ring three "bip", the multicooker
will enter keep warm status with the "Keep Warm" indicator turning on
and the screen will start to count the time of keeping warm.
Note:
• Certain cooking programs are defined as fully automatic programs,
hence the temperature and/or cooking time adjustment is not
possible.
• The multicooker memorizes the last temperature and cooking time
DIY setting for your next use.
• To protect the appliance, there is a temperature/time setting
restriction in DIY function:
Between 40-100°C, the cooking time range is 1min - 9h
Between 105-160°C, the cooking time range is 1min - 2h
EN
14