Sharp RX-P1H Technisches Handbuch Seite 44

©
8-1. Servo system control
eer <TSCK90°
"O" =. 800Hz, "1" = 666.6Hz
Capstan FG:
Table 8-1. HSW switching table
Capstan FG switching
a = aan "1" = 466.6Hz
Code {Mode
Signal waveform
rum rotation:
The drum rotation control method is switched in normal mode. mE ener nese our —f TH] TAT rem [/RT TEL]
the drum control command (when drum control command after-recording
is used by the AFT synchronizing detection circuit. ;
Used to switch a standard signal to enable the use
After-recording mode:
Used to enter the after-recording mode.
See Table 8-2.
Table 8-2. After-recording mode
- 54-