Unpacking; Assembly; Before.starting - Hecht 8573 Originalbetriebsanleitung

Caution! Do not touch the damaged cable and pull the mains plug when the cable
is damaged while working. Damaged cables increase the risk of an electric shock.
If the power supply is damaged, it must be immediately replaced with a cable
without defect, to avoid dangerous situations.
Note: In case of doubt, check with your electricity supplier or with your electrician
if your home connection meets these requirements.

UNPACKING

• Carefully remove the product from the box.
• Carefully inspect all parts. If any part is damaged or missing, contact your dealer or authorized
service center.
• Do not throw away packaging materials until you have not reviewed carefully if they did not
remain a part of the product.
• Parts of the packaging (plastic bags, paper clips, etc.) do not leave within reach of children,
could be a possible source of danger. Do not let children play with plastic bags, foils or small
parts. There is a danger of swallowing or suffocating!
• Disposal must be made in accordance with the regulations in force in the country in which the
equipment was installed.
• Make sure that bags and containers of plastic material are left strewn freely in the environment
because they pollute it.
• If you have any doubt do not use the machine, but have it checked by an authorized service
center.
PACKAGE.CONTENTS
1x machine body, 1x debris collection bag, 1x suction nozzle, 1x handle, 1x discharge chute, 1x
manual for use

ASSEMBLY

If you notice transport damage or while unpacking, notify your supplier immediately. Do not
operate the machine!
1. Use the hook bolts (fig. 2A) with nuts (fig. 2B) to fix the lower part of the handle on the
machine.
2. Attach suction nozzle into locator on the product (fig. 3A) and tighten with hexagonal screw
(fig. 3B).
3. Fit discharge chute (fig. 4A) on product and tighten with 4 hexagonal screws (fig. 4B).
4. Hang the collection bag on the handle (fig. 5).
5. Push opening (fig. 6A) of the debris collection bag to discharge chute and secure with clip.
BEFORE STARTING
For your safety, and to maximize the service life of your equipment, it is very important to take
a few moments to check the engine condition before operating Be sure to take care of any
problem you find, or have your servicing dealer to correct it before you operate the engine.
EN
DE
CS
SK
PL
25 / 148